Max.swing over bed:

400mm

Max.swing over carriage:

260mm

Max.swing over gap:

700mm

Max. Length of work piece:

1500mm

Max. cutting length:

1450mm

Dia.of spindle bore:

52mm

Taper of center sleeve:

Morse No.6

Spindle speed:

11-1400rpm/22speeds

Longitudinal feed:

0.035-2.842mm/rev

Cross feed:

0.009-0.804mm/rev

Metric thread:

0.5-240(66)

Whitworth thread:

80-1/4(49)tpi

Module thread:

0.25-120(57)mm

Diametrical pitch thread:

160-7-16DP(50)mm

Section of tool shank:

25×25

Travel of top slide:

150mm

Max.travel of cross slide:

348mm

Pitch of longitudinal leadscrew:

12mm

Travel of tailstock center sleeve:

150mm 

Diameter of tailstock center sleeve:

75mm

Taper of tailstock center sleeve:

Morse No.5

Main motor power:

7.5kW(50Hz)

Wooden case/Steel pallet:


Gross/net weight(kg):

750mm:2740×1150×1900/2580×1120×1610mm
             2770/2070|2820/2120|2928/2228
1000mm:2990×1150×1900/2800×1120×1610mm
               2815/2120|2865/2170|2973/2278
1500mm:3490×1150×1900/3300×1120×1610mm
               3905/2170|2955/2220|3063/2328
2000mm:3990×1150×1900/3800×1120×1610mm
               2995/2280|3045/2330|3153/2438
3000mm:4990×1150×1900/4800×1120×1610mm
               3245/2330